EASY LINER is a technical base wallpaper for leveling uneven surfaces. It is a fiberglass-free ready-made product designed to replace textural wallpaper, fiberglass wallpaper, or the full plastering of wood fiber boards. A quick, easy, and convenient solution for preparing the surface to be wallpapered. Easy Liner is completely stable in its dimensions and is intended for indoor use. Roll dimensions: 1 m x 10.0 m Material: polyester and cellulose Adhesive: adhesive designed for heavier non-woven wallpapers Does not contain PVC, plasticizers, or fiberglass. Installation Instructions Check for visible defects in the product. In case of any faults, stop the installation and contact the retailer. The surfaces to be wallpapered must be dry and clean. Remove any loose layers. Larger irregularities need to be plastered. Highly absorbent surfaces may require priming. Apply adhesive evenly to the substrate, adhering 2–3 panels at a time. The estimated adhesive consumption is about 2 - 2.5 liters per roll. Install the panels edge to edge and carefully push the air out from underneath the panel using a wallpapering tool. Avoid excessive rubbing to prevent the lower texture from showing through. It is advisable to test the result on a smaller area first. In corners, the Easy Liner panel must be cut at the corner. This applies to both external and internal corners. Before wallpapering, allow the surfaces to dry completely (12 - 24 hours).

• SKU: 21
• Brand : Boråstapeter
• Country of manufacture: Sweden
• Unit: RL
• Width (m): 1.0
• Length (m): 10.0
• Glue: Quelyd Fliselin / Kiilto Master Flis
• Availability: Approximately two weeks
• In Stock: 10