EASY-UP RECOVER is a technical base wallpaper designed for leveling uneven surfaces. It is a fiberglass-free ready-made product that replaces, in most cases, textural wallpaper, fiberglass wallpaper, or the full plastering of wood fiber boards. A quick, easy, and convenient solution for preparing surfaces to be wallpapered or painted. EasyUp Recover is completely stable in its dimensions and wrinkle-resistant. It is impact and scratch-resistant and is intended for indoor use. Weight: 310-350 g/m² Roll dimensions: 0.97 x 10 m Material: polyester Surface: mineral-type double-sided material Adhesive: adhesive designed for heavier non-woven wallpapers Does not contain PVC, plasticizers, or fiberglass. Installation Instructions Check for visible defects in the product. Any defects appearing in the first or last meters of the roll should be compensated for with additional roll length. The surfaces to be wallpapered must be dry and clean. Remove any loose layers. Larger irregularities need to be plastered. Highly absorbent surfaces may require priming. Apply an even thick layer of adhesive (about 0.5 liters/m²) to the surface of the wall or ceiling. Use a roller or brush for application. Apply adhesive liberally for two panels at a time and wait about 15 minutes before installation. For installation, the leveling wallpaper roll can be placed on the floor, then pulling and cutting the panels from there, or the panels can be cut to size beforehand. It is advisable to test the result on a smaller area first. Install the EasyUp Recover panels edge to edge. They can also be installed with an overlap, and then both layers can be cut through simultaneously at the perfect joint, with the excess removed. In corners, the EasyUp Recover panel must be cut at the corner. This applies to both external and internal corners. Acrylic is applied to the inside corner before painting. When wallpapering, smooth the panel with a wallpapering tool. Avoid excessive rubbing to prevent the lower texture from showing through. Allow the wallpaper to dry for about a day. After that, you can start wallpapering/painting.
- SKU: 24
- Brand : Boråstapeter
- Country of manufacture: Sweden
- Unit: RL
- Width (m): 0.97
- Length (m): 10.0
- Glue: Quelyd Fliselin / Kiilto Master Flis
- Availability: Approximately two weeks
Important information!
Computer and phone screens may distort the actual colour of the product. To make sure the colour and material are right for your interior, you are welcome to view our samples at our showroom at Pärnu mnt 66, Tallinn. You can also order an A4 wallpaper sample – samples are subject to a charge, but delivery to a parcel locker in Estonia is free of charge. Please keep the labels from the wallpaper rolls until the installation is complete. The label contains the product code and batch number, which are required if additional material needs to be ordered. Before installation, please check the wallpaper carefully for any defects. If you notice a defect, stop the installation immediately and contact us. Defective material will be replaced as soon as possible. Scandinavia tapeedisalong does not compensate for costs related to the installation of defective wallpaper.